Get in touch with QJKH Company
SH27 SERIES · SAFETY
SH27-05S Safety Laser Scanner
5 m Protective Range for Industrial Safeguarding
The SH27-05S provides safety laser scanning with a 5 m protective range for AGV, AMR, machine and industrial area safeguarding applications.
5 m Protective Range
20 m Warning Zone
276° Scanning Angle
PNP OSSD
WHY SH27-05S
Reliable Safety Monitoring for Mobile and Stationary Applications
The SH27-05S is designed for safety-related area monitoring in AGV, AMR, machine and industrial safeguarding applications, with configurable protective fields and PNP OSSD safety outputs.
SAFETY FUNCTION
5 m Protective Monitoring
Safety-related protective monitoring is implemented through PNP OSSD outputs for mobile and stationary safeguarding applications.
- 5 m protective range
- PNP OSSD safety outputs
- Configurable protective fields
- Suitable for AGV, AMR and machine safeguarding
FLEXIBLE FIELD CONFIGURATION
Adapt Protective Fields to Operating Conditions
Configurable zone sets allow the active monitoring field to be adapted to different machine states, travel directions and mobile operating conditions.
- Up to 64 configurable zone sets
- Static field switching by control inputs
- Speed-dependent protective field switching
- Dual protective zone mode
Designed for safety-related monitoring through PNP OSSD outputs.
PNP OSSD
Safety-related safeguarding output
+
Configurable Fields
Adapt monitoring to operating conditions
=
SH27-05S
Safety scanning platform
PROTECTIVE & WARNING FIELDS
Configurable Protective and Warning Fields
The SH27-05S supports configurable protective and warning fields for flexible safety monitoring in mobile and stationary applications.
SAFETY-RELATED
5 m Protective Zone
The protective zone provides safety-related monitoring. When an object enters the active protective field, the PNP OSSD safety output switches OFF.
Protective Zone
Safety monitoring field
→
Object Detected
Inside active field
→
OSSD OFF
Safety output response
WARNING FUNCTION
20 m Warning Zone
Warning fields provide early detection and signaling functions before an object reaches the protective zone.
Warning Zone
Pre-warning monitoring
→
Object Detected
Inside warning field
→
Warning Signal
Early indication
Important:
Warning fields are not safety-related and must not be used as a substitute for protective fields.
CONFIGURABLE SAFETY FIELDS
Flexible Protective Fields for Changing Operating Conditions
The SH27-05S supports up to 64 configurable zone sets, allowing the active monitoring field to be adapted to different machine states, travel directions and AGV operating conditions.
FIELD CONFIGURATION
UP TO 64
Configurable Zone Sets
Preconfigured field shapes can be stored and selected according to the operating condition of the machine or mobile platform.
STATIC SWITCHING
Switch Fields by Control Inputs
Preconfigured zone sets can be selected through control inputs to change the active monitoring field according to machine states or operating modes.
Control Input
→
Zone Set
→
Active Field
DYNAMIC SWITCHING
Speed-Dependent Protective Field Switching
Dynamic control inputs can be used with incremental encoder signals to select protective fields according to AGV travel speed.
Lower Speed
Shorter protective field
→
Higher Speed
Extended protective field
DUAL PROTECTIVE ZONE MODE
Two Independent Protective Zones
Two protective zones can be monitored independently, with each zone assigned to its corresponding OSSD output pair.
Protective Zone 1
OSSD1
Protective Zone 2
OSSD2
AGV application:
Protective fields can be changed according to operating conditions such as vehicle
speed, helping maintain an appropriate monitored area during mobile operation.
FIELD OPERATING MODES
Two Safety Field Operating Modes
The SH27-05S supports two field operating modes for different safeguarding requirements: Protective Zone + Warning Zone Mode and Dual Protective Zone Mode.
01
PROTECTIVE + WARNING MODE
Protective Zone with Warning Zones
In this mode, one safety-related protective zone is used together with two non-safety warning zones for pre-warning and signaling functions.
Safety-Related
Protective Zone
OSSD safety response
+
Non-Safety
Warning Zone 1
ALARM1
Non-Safety
Warning Zone 2
ALARM2
Warning zones are non-safety-related and must not be used for safety-related functions.
02
DUAL PROTECTIVE ZONE MODE
Two Independent Protective Zones
In Dual Protective Zone Mode, two safety-related protective zones are monitored independently through their corresponding OSSD output pairs.
Protective Zone 1
OSSD1
Protective Zone 2
OSSD2
Each protective zone is assigned to its corresponding OSSD output pair.
TECHNICAL SPECIFICATIONS
SH27-05S Technical Specifications
Key technical specifications for the SH27-05S safety laser scanner with 5 m protective range and safety-related PNP OSSD outputs.
5 m
Protective Range
20 m
Warning Zone
276°
Scanning Angle
0.1°
Angular Resolution
30 Hz
Scanning Rate
| Measurement Principle | Direct Time-of-Flight (dTOF) |
|---|---|
| Protective Range | 5 m at 1.8% reflectivity |
| Warning Zone | 20 m |
| Scanning Angle | 276° |
| Angular Resolution | 0.1° |
| Scanning Rate | 30 Hz |
| Object Resolution | 70 mm at maximum protective range |
| Response Time | Configurable, 100–567 ms |
| Configurable Zone Sets | Up to 64 |
| Safety Output | PNP OSSD |
| Laser | 905 nm, Class 1 laser product |
| Supply Voltage | DC 24 V ±20% |
| Power Consumption | < 5 W, no load |
| Protection Rating | IP65 |
| Operating Temperature | −10°C to +50°C |
| Dimensions | 80 × 80 × 79.5 mm |
SAFETY PERFORMANCE
Type 3 · SIL 2 · Cat. 3 · PL d
Safety performance is specified in the manufacturer documentation according to the applicable IEC and ISO standards for the SH27 series.
05S CONFIGURATION
Safety Scanning
The SH27-05S provides safety-related PNP OSSD outputs for mobile and stationary safeguarding applications.
Documentation note:
Specifications shown here are based on the manufacturer’s current technical
documentation. Contact us for the latest documentation applicable to your
required model and market.
APPLICATIONS
Where the SH27-05S Can Be Used
The SH27-05S is designed for mobile and stationary safeguarding applications, including AGV, AMR, machine and industrial hazardous-area protection.
01
MOBILE SAFEGUARDING
AGV & AMR Safety Protection
Use the SH27-05S to monitor hazardous areas around mobile platforms and support personnel protection during vehicle operation.
- Personnel protection around moving vehicles
- Mobile hazardous-area safeguarding
- Configurable protective fields
- Speed-dependent protective field switching
Safety function
Implemented through PNP OSSD outputs
02
FLEXIBLE FIELD CONTROL
Adapt Protective Fields to Vehicle Operation
Configurable zone sets and control inputs allow the active protective field to be adapted to different travel conditions and operating states.
- Up to 64 configurable zone sets
- Static switching by control inputs
- Speed-dependent protective field switching
- Dual protective zone mode
Mobile safety flexibility
Protective fields can be adapted to changing operating conditions
03
STATIONARY SAFEGUARDING
Machine & Industrial Area Protection
The scanner can also be used for stationary safeguarding where access to a hazardous area needs to be monitored.
- Machine safeguarding
- Hazardous-area monitoring
- Access and approach protection
- Configurable monitoring fields for different operating states
Flexible installation
For mobile or stationary safeguarding applications
SAFETY
PNP OSSD
Safety-related protective monitoring
+
FIELDS
Configurable Zone Sets
Adapt monitoring to operating conditions
=
SH27-05S
Flexible Safety Monitoring
For mobile and stationary applications
Model Selection
Is SH27-05S the Right Model for Your Application?
Compare the four SH27 configurations by protective range and Ethernet raw scan-data capability. All four models retain the SH27 safety architecture; D models additionally provide non-safety Ethernet raw scan data for host-side processing.
SH27-03S
3 m · Safety
3 m Safety Scanning
Protective Range
3 m
Warning Zone
10 m
Safety Output
PNP OSSD
Ethernet Raw Data
No
SH27-03D
3 m · Safety + Ethernet
3 m Safety + Raw Scan Data
Protective Range
3 m
Warning Zone
10 m
Safety Output
PNP OSSD
Ethernet Raw Data
Yes
Current Model
SH27-05S
5 m · Safety
5 m Safety Scanning
Protective Range
5 m
Warning Zone
20 m
Safety Output
PNP OSSD
Ethernet Raw Data
No
Best fit when a 5 m protective range and PNP OSSD safety outputs
are required without Ethernet raw scan-data output.
SH27-05D
5 m · Safety + Ethernet
5 m Safety + Raw Scan Data
Protective Range
5 m
Warning Zone
20 m
Safety Output
PNP OSSD
Ethernet Raw Data
Yes
Interface note:
Ethernet raw scan data on SH27 D models is supplementary non-safety
information for host-side processing. The safety-related protective
function continues to use the PNP OSSD safety outputs.
FAQ
SH27-05S Safety Laser Scanner FAQ
Answers to common questions about the SH27-05S protective range, field operating modes, configurable zone sets and AGV applications.
What is the difference between SH27-05S and SH27-05D?
Both models provide a 5 m protective range and PNP OSSD safety outputs.
The SH27-05D additionally provides Ethernet raw scan-data output,
while the SH27-05S is the safety-only configuration without Ethernet raw data output.
What is the protective range of the SH27-05S?
The SH27-05S has a 5 m protective range at 1.8% reflectivity.
Is the 20 m warning zone safety-related?
No. Warning zones are non-safety-related and must not be used
for safety-related applications.
What field operating modes does the SH27-05S support?
The SH27-05S supports Protective Zone + Warning Zone Mode
and Dual Protective Zone Mode.
Can the SH27-05S monitor two protective zones independently?
Yes. In Dual Protective Zone Mode, Protective Zone 1 is assigned
to OSSD1 and Protective Zone 2 is assigned to OSSD2 for independent
safety monitoring.
How many configurable zone sets does the SH27-05S support?
The SH27-05S supports up to 64 configurable zone sets.
Can protective fields be switched according to AGV speed?
Yes. Dynamic control inputs can be used with incremental encoder signals
to select protective fields according to AGV travel speed.
What safety outputs does the SH27-05S provide?
The SH27-05S provides PNP OSSD safety outputs. The OSSD outputs
are used for safety-related protective monitoring.
How is the SH27-05S configured?
The SH27-05S supports PC configuration through its front USB Type-C
interface for setting monitoring fields and related operating parameters.
Can the SH27-05S be used for AGV or AMR safeguarding?
Yes. The SH27-05S can be used for mobile safeguarding applications
such as AGV and AMR personnel protection, with configurable and
speed-dependent protective fields.
Have another technical question?
Tell us your application, required protective distance and field-configuration requirements.
Ask Our Engineers →
Technical Resources
SH27-05S Technical Documents
Download the current SH27-05S product specification and SH27 Series operation manual, or contact CCH for project-specific documentation and application support.
01
Product Specification
SH27-05S Product Specification
Model-specific technical information covering protective range, warning range, scanning performance, electrical characteristics, safety outputs and environmental specifications.
02
Operation Manual
SH27 Series Operation Manual
Detailed information covering installation, wiring, field configuration, safety functions, zone switching, commissioning, diagnostics and operating instructions for the SH27 series.
03
Project Documentation
Need Documents for Your Machine Project?
Contact CCH if your project requires additional model information, integration guidance or documentation applicable to a specific machine, market or customer requirement.
Document note:
Always verify that the document revision matches the product supplied
for the project. Additional compliance or project documentation may be
available for applicable models and project requirements.
APPLICATION SUPPORT
Need Help with Your SH27-05S Application?
Send us your application details and our engineers can help confirm whether the SH27-05S is suitable for your safeguarding requirements.
01
Application Type
AGV, AMR, machine or industrial area
02
Required Protective Distance
Tell us the safeguarding distance or working area
03
Field Configuration Requirement
Tell us your operating states and field-switching requirements
ENGINEERING SUPPORT
Discuss Your Application
Send us your application requirements and we will help you select the appropriate SH27 model and field configuration.